Spoofer [ UBGG Perm ] is an HWID spoofer: it has no menu — it changes hardware IDs and is verified by serial numbers before and after.
Requirements
- Windows 10 or 11 (x64)
- Back up your data — spoofing changes hardware IDs
System requirements
Preparation
Disable Windows protection — that's enough for most systems.
Remove third-party antivirus and anti-cheats Kaspersky, Avast, ESET and the like, plus FaceIT and Riot Vanguard, conflict with the loader. They must be uninstalled, not just paused.
-
Open Settings → Apps → Installed apps (or Control Panel → Programs and Features).
-
Uninstall any third-party antivirus (Kaspersky, Avast, AVG, ESET, 360, Malwarebytes, etc.). Pausing or disabling is not enough — the antivirus driver stays resident.
-
Uninstall the FaceIT AC and Riot Vanguard anti-cheats if present — they block third-party software at the kernel level.
- FaceIT is the CS2 anti-cheat, Vanguard is the Valorant one. If you don't play those games, they are safe to remove.
After removing an antivirus, restart the PC — some of its services only unload after a reboot.
Fully disable Windows Defender The #1 cause of "it won't launch". Disable it for real: manually first, then remove it from startup, reboot, and finish it off with Defender Control.
-
Step 1. Turn protection off by hand. Open Windows Security → Virus & threat protection → Manage settings and switch every toggle off:
- Real-time protection — Off.
- Cloud-delivered protection — Off.
- Automatic sample submission — Off.
- Tamper Protection — Off. Turn this one off first, otherwise the others switch themselves back on.
-
Step 2. Disable reputation-based protection. In Windows Security → App & browser control → Reputation-based protection → Settings, turn everything off (SmartScreen, potentially-unwanted-app blocking).
-
Step 3. Remove Defender from startup. Open Task Manager (Ctrl+Shift+Esc) → Startup apps tab, find Windows Security notification icon and click Disable.
-
Step 4. Restart your computer. This is mandatory — some Defender services only unload after a reboot.
-
Step 5. Finish with Defender Control. Download Defender Control (archive password: r1xon), run it as administrator and click Disable Windows Defender — the tile turns red.
- If your antivirus deletes the utility itself, protection is still active — go back to step 1. The file ships zipped on purpose so Defender can't wipe it before it's disabled.
Don't skip steps 3–4. "I turned the toggles off but it didn't help" almost always means Defender came back after restart because it was left in startup.
-
If your game requires a clean system, download the official Media Creation Tool from Microsoft.
-
Create a Windows ISO and write it to a USB drive through Rufus.
-
If you use Wi-Fi, save the network driver to the USB drive in advance. You can check the motherboard model with `Win + R` -> `msinfo32`.
-
Install Windows cleanly and do not log into old banned accounts.
-
After installation, install drivers and required runtimes before launching the spoofer.
-
Keep the USB drive available until all preparation is complete.
-
Create a separate folder on the desktop with a Latin-only path, for example `C:\Mureh\`.
-
Download Mureh Installer and move it to this folder.
-
Run `install_all.bat` as administrator, wait for completion, then reboot the PC.
-
Close launchers, games, anticheats and VPN before spoofing.
-
Run all spoofer files only as administrator.
Launch
-
Open Mureh Checker.exe and save your current serial numbers to a separate file.
-
In Mureh Installer select PermSpoofer, enter your key, download and extract the loader.
-
Run the loader as administrator, enter your key and enable Remember me.
-
Select Driver Spoof and choose Other unless support told you otherwise.
-
Do not enable GPU Spoof unless you specifically need it.
-
Start spoofing and wait until the loader reports success.
-
Open the checker again and compare serial numbers.
-
Reboot the PC if the instruction or loader asks for it.
-
Only after successful verification launch the game on a new account.
Problems & fixes
Serial numbers did not change
Check administrator launch, Defender/antivirus disable state, Driver Spoof, and that GPU Spoof was not enabled by accident. Reboot and spoof again.
The game still bans a new account after spoofing
Some games require clean Windows reinstall, BIOS/UEFI flashing, a new Windows user, PC name change and network reset. For FaceIt, check RAID0/new drive requirements.
Valorant still shows a TPM/HWID block
UBGG Perm does not replace TPM spoofing. For Valorant TPM bans, use a separate TPM Spoofer, then try a new account.
Loader does not start
Move the loader to a Latin-only path, disable protection, install Visual C++ Runtimes and run as administrator.
BIOS flashing is required
Use only the official motherboard vendor file and follow the vendor flashing guide exactly.
More launch tips
• Permanent spoofing changes serial numbers for long-term use: save important data and old serials before starting.
• Some games require a clean Windows reinstall, and some anticheats may require BIOS/UEFI flashing.
• Valorant TPM bans require a separate TPM Spoofer.
• Prepare a USB drive of at least 8 GB for Windows installation or system preparation.
• Use a new account after successful spoofing. Do not test with an already banned account.
• Open `msinfo32` and write down BaseBoard Product, BaseBoard Manufacturer and the current BIOS version.
• Download BIOS/UEFI only from the official website of your motherboard manufacturer.
• Use a FAT32 USB drive. If Windows does not offer FAT32, prepare the drive with a separate utility.
• Do not interrupt BIOS flashing and do not power off the PC during the process.
• After BIOS flashing, load optimized defaults if your motherboard requires it, then repeat the spoofing steps.
• Do not immediately log into apps with strict PC binding: Logitech G HUB, GeForce Experience, Razer, Medal, Microsoft, OneDrive, SteelSeries.
• For Fortnite, use VPN for 10-14 days after spoofing if your situation requires it.
• Do not use an account that already received a 24-hour ban or VPN-kick.
• If a game keeps banning new accounts, check whether Windows reinstall, BIOS/UEFI flashing, RAID0 or new drives are required.
Advanced setup — only if it still won’t launch
Disable Secure Boot Secure Boot stops the loader from starting. Check the status first, then disable it in BIOS if needed.
-
Check the status: press Win+R, type msinfo32, and in System Summary find Secure Boot State. If it reads Off or Unsupported — you're set, skip the rest.
-
If it's On — enter BIOS/UEFI (tap Del, F2 or F10 while the PC boots — depends on the motherboard).
-
Find Boot or Security → Secure Boot and set it to Disabled. Save (usually F10) and reboot.
- If Secure Boot is greyed out, set a Supervisor Password under Security first — that unlocks the option. You can remove the password afterwards.
Enable virtualization (VT-x / SVM) The loader needs hardware CPU virtualization. Enabled in BIOS.
-
Enter BIOS/UEFI and open Advanced → CPU Configuration (naming varies by board).
-
Enable Intel Virtualization Technology (VT-x) on Intel, or SVM Mode on AMD. Save and reboot.
Disable Hyper-V and Windows virtualization Windows' own virtualization features grab the hypervisor and get in the loader's way. Disabled separately from VT-x.
-
Open Control Panel → Programs → Turn Windows features on or off and uncheck Hyper-V, Virtual Machine Platform and Windows Hypervisor Platform.
-
Open Command Prompt as administrator, run the command, then reboot:
bcdedit /set hypervisorlaunchtype off -
Also turn off Memory Integrity and Application Guard if enabled (see "Disable Core Isolation").
Disable Core Isolation Memory Integrity blocks the driver from loading. Takes a minute to switch off.
-
Open Windows Security → Device security → Core isolation details.
-
Turn off Memory Integrity and restart the PC.
Disk in GPT layout If the loader says "Unsupported firmware", the system disk is MBR and needs converting to GPT.
-
Check the layout: Win+R → diskmgmt.msc, right-click the system disk → Properties → Volumes → Partition style. It should read GUID (GPT).
-
If it's MBR, convert without data loss: admin Command Prompt, run mbr2gpt /convert /allowfullOS. After converting, switch the BIOS boot mode to UEFI.
Back up anything important before converting. It usually goes smoothly, but a disk is a disk.
Disable Intel RST (Rapid Storage) On some laptops Intel RST mode gets in the loader's way. Switched to AHCI in BIOS.
-
In BIOS find SATA Mode / Storage Configuration and switch from Intel RST / RAID to AHCI. Save and reboot.
If Windows won't boot after switching to AHCI, boot into Safe Mode once — Windows picks up the AHCI driver, then reboot normally.
Use a VPN for download and activation CIS ISPs often block the activation servers. A VPN is needed while downloading the loader, activating the key and injecting — you can turn it off before joining a match.
-
Use a full VPN (an app that routes all traffic), not a browser proxy, VLESS or extension — half the support tickets come from exactly this.
-
Turn the VPN on before downloading the loader and activating the key. If something won't load, switch country (Europe or the US usually work).
-
After a successful inject you can turn the VPN off before the match to avoid extra ping.
A VPN fixes most endless-loading and "key won't activate" problems.
Update Visual C++ and DirectX Up-to-date runtimes keep the loader and overlay from crashing at start.
-
Install Visual C++ Redistributable x64 and restart the PC.
-
Update DirectX if you haven't in a while.
FAQ
Where do I get the key after payment?
The key arrives instantly after payment — it appears on the order page and lands in your email, and if Telegram is linked to your account, our bot sends a copy too. This guide opens from there as well.
Still stuck?
Run R1XON Checker first — it pinpoints most launch problems in 30 seconds. If it still fails, attach the checker report to your support ticket and we’ll sort it out fast.